Proxima POLE semaphore lamp (100×100, 120×120)

Proxima LED Post Signal Lamp 12-24V AC/DC SEMAFOR (100×100, 120×120)

The SEMAFOR POST Signal Lamp is the ideal solution wherever traffic safety information is needed. Thanks to the independent power supply for the green and red LEDs, the lamp can function as a semaphore.

The lamp forms the end of a rectangular post measuring 100 x 100 mm or 120 x 120 mm. The post opening dimensions must be at least 85 x 85 mm. The lamp is powered by 12-24V AC/DC (green) and 12-24V AC/DC (red).

The red and green LEDs have independent power supplies, and their operation is controlled by jumpers. The absence of a jumper means the LEDs operate independently of each other and can illuminate or flash according to the supplied power. The jumper setting on the switch determines the operating priority.

When prioritizing the red LEDs, applying voltage to their power supply immediately changes the LEDs from green to red. The priority can be set to 0 or 2 seconds, which determines how long the green LEDs must be de-energized before the red LEDs re-activate. Setting both jumpers to the 0 position activates the "first come, first served" mode, where the first voltage determines the lighting color.

Installing the lamp requires drilling a small hole in the post to adjust the screw. The mechanism used clamps the housing inside the post by turning the screw. It is also equipped with spring spacers.

TECHNICAL PARAMETERS:

• Power supply: 12-24V AC/DC
• Current consumption 12V: 12V-200mA
• Current consumption 24V: 24V-100mA
• Light source: LED
• Circuit breaker: No
• Operating temperature: -20º to +60º C
• Ingress protection: IP54
• Dimensions: above the post: 123 x 123 x 26 mm, in the post: 85 x 85 x 20 mm
• Weight: 283 g