/
/
/
- Universal base for photocells and lamps
- Compatible with photocells Viky, and Idea flash lights
5,29
EUR
including 23.00% VAT
- Range: 10m
- Contacts: NO - NC
- Power supply: 24 V AC / DC
58,92
EUR
including 23.00% VAT
- Range: 15m
- A wide range of adjusting the angle of view
- Wireless transmitter
- Relay outputs
- For units with a classical entrance PHOTO / STOP
97,37
EUR
including 23.00% VAT
- For MOON accessories
- Tight fit and aesthetic appearance
12,71
EUR
including 23.00% VAT
- Range: 30m
- Relay outputs
- Polycarbonate housing
- For classic PHOTO/STOP control input
38,11
EUR
including 23.00% VAT
- Range: 30m
- Viewing angle: 10°
- Relay outputs
- Polycarbonate housing
- For classic PHOTO/STOP control input
60,48
EUR
including 23.00% VAT
- EPM photocell holder
- The base is double-sided
- Width: 40mm
- Possibility of mounting the set on a 40x40mm post
18,14
EUR
including 23.00% VAT
- Range: 30m
- Viewing angle: 10°
- BLUEBUS Technology
- Polycarbonate housing
72,57
EUR
including 23.00% VAT
- Range: 30m
- ECSBus system
- Power supply: from a control panel with ECSbus technology
- Cooperation with NiceHome and Mhouse
69,56
EUR
including 23.00% VAT
- Power supply: 12-24V AC/DC
- Transmission and reception angle: +/- 25°, rotation 190°
- Range: up to 9m
- 3 operating modes
- LED signaling
71,07
EUR
including 23.00% VAT
- For XW, LN, XA drives
- Connection via 2 wires
- Plastic casing
- They do not work with the TS432KM drive
75,60
EUR
including 23.00% VAT
- Range: 30m
- Relay outputs
- Polycarbonate housing
- For classic PHOTO/STOP control input
90,42
EUR
including 23.00% VAT
- Range: 15m
- Viewing angle: 10°
- Technology BLUEBUS
- Polycarbonate housing
68,04
EUR
including 23.00% VAT
- Range: 30m
- Adjustable viewing range: 30°
- Relay outputs
- Polycarbonate housing
- For classic PHOTO/STOP control input
77,11
EUR
including 23.00% VAT
- LED warning light
- Rotatable construction (190 °)
- Three transmitter powers
- Anti-collision - four work channels
39,82
EUR
including 23.00% VAT
Gate photocells are small but essential components of gate automation systems that enhance safety and convenience. Their primary function is to detect obstacles in the gate's path, enabling the gate to stop moving if a collision risk is detected.
Working Principle:
Photocells consist of two parts: a transmitter and a receiver. The transmitter emits an infrared light beam, and the receiver detects its arrival. If the beam is interrupted, for instance, by a person or vehicle in the gate's path, the photocells send a signal to the gate control unit. The control unit interprets this signal as a command to stop the gate's movement, preventing potential injury or damage.
Advantages of Gate Photocells:
-
Enhanced Safety: Photocells protect people, animals, and objects from being struck by a closing gate.
-
Convenience: The gate automatically opens for approaching vehicles or pedestrians, eliminating the need for manual operation.
-
Easy Installation: Photocells are simple to install and do not require specialized tools.
-
Versatility: They can be used with various gate types and operators.
Additional Photocell Features:
-
Range: Some models offer adjustable range, allowing customization to the specific mounting location.
-
Detection Angle: Wide-angle detection photocells provide protection over a larger area.
-
Enclosure: Weatherproof and dustproof models are available for outdoor installation.
