Satel SLIM-R-DUAL-PRO Ceiling dual motion detector with anti-masking, recessed

Satel SLIM-R-DUAL-PRO Ceiling-mounted dual motion detector with anti-masking, for recessed mounting

SLIM-S-DUAL-PRO is an indoor motion detector from the SLIM LINE series, designed for recessed ceiling mounting. It is ideal for locations where mounting a wall-mounted detector is impossible or undesirable. Thanks to its 360° detection field, it can be used to monitor stores, warehouses, and other locations where the detection field of a ceiling-mounted detector facing downward will cover the room more effectively than that of a wall-mounted detector.

FEATURES:

• Meets the requirements of the EN 50131-2-4 standard for Grade 3.
• Motion detection using two sensors: a passive infrared sensor (PIR) and a microwave sensor (MW).
• Maximum detection area:
• • ø 6 m / 28 m2 – mounting height 2.4 m.
  • ø 10 m / 79 m2 – mounting height 3.5 m.
• Digital motion detection algorithm for both sensors.
• Digital temperature compensation.
• Adjustable detection sensitivity of both sensors.
• Separate sensor testing possible.
• Digital filter for signals received by the microwave sensor ensures Immunity to interference from the power grid and discharge lamps
• Operation mode selection: basic or advanced
• Active IR anti-masking compliant with EN 50131-2-4 for Grade 3
• Configurable settings:
• • Buttons on the electronics module
  • OPT-1 remote control
• Built-in EOL resistors: 1.1 k, 4.7 k, 5.6 k
• LED indicator:
• • Light color selection (7 colors available)
  • Remote indicator on/off
• Remote configuration mode on/off
• Motion detection system supervision
• 12 V DC (15%) power supply
• Power supply voltage control
• Sabotage protection against opening the housing and removal from the mounting surface
• flush mounting

TECHNICAL DATA:

• Power supply voltage: 12 V DC ±15%
• Standby current consumption: 18 mA
• Maximum current consumption: 50 mA
• EOL resistors: 2 x 1.1 kΩ / 2 x 4.7 kΩ / 2 x 5.6 kΩ
• Outputs:
• • Alarm (NC relay, resistive load): 40 mA / 24 V DC
  • Anti-masking (NC relay, resistive load): 40 mA / 24 V DC
  • Tamper (NC relay, resistive load): 40 mA / 24 V DC
• Relay contact resistance:
• • Alarm output: 26 Ω
  • Anti-masking output: 26 Ω
  • Tamper output: 26 Ω
• Microwave frequency: 24.125 GHz
• Detectable motion speed: 0.2...3 m/s
• Alarm signaling time: 2 s
• Warm-up time: 30 s
• Recommended mounting height: 2.4...3.5 m
• Maximum detection area:
• • Mounting at a height of 2.4 m: ø 6 m [28 m2]
  • Installation height 3.5 m: ø 10 m [79 m2]
• Protection level according to EN 50131-2-4: Grade 3
• Standards complied with: EN 50131-1, EN 50131-2-4, EN 50130-4, EN 50130-5
• Environmental class according to EN 50130-5: II
• Operating temperature range: -10°C...+55°C
• Maximum humidity: 93±3%
• Dimensions: ø 120 x 37 mm
• Weight: 117 g