BFT 2611838 Sliding gate automation kit DEIMOS BT A600 KIT

BFT 2611838 DEIMOS BT A600 KIT sliding gate automation kit

The kit includes: DEIMOS BT A 600 actuator with HAMAL control unit COMPACTA photocell set MITTO B2 remote control

BFT 2611838 Sliding gate automation kit DEIMOS BT A600 KIT

Automation kit for residential sliding gates weighing up to 600 kg. It has a 24V motor and a built-in HAMAL control unit. Electromechanical limit switch. Control unit programming is done using buttons, potentiometers and DIP-SWITCHES.

The amperometric obstacle detection function, soft start and slowdown are just some of the attributes of DEIMOS BT drives. Unlocking using a lever with a personalized key (approx. 40 insert numbers) provides additional security against intrusion into the property.

Drive for residential sliding gates weighing up to 600 kg. It has a 24V motor and a built-in HAMAL control unit. The control unit is programmed using buttons and potentiometers and has an integrated two-channel radio receiver with a dynamically changing code and memory for 63 remote controls.

The drive has an amperometric obstacle detection function.

The lever release guarantees easy motor unlocking, and the personalized key ensures its uniqueness, ensuring greater safety

The front screws are arranged in a way that guarantees ease and convenience during installation and maintenance, also in situations with limited space. The wing speed reaches 12 m/min.

FEATURES:

• Residential sliding gate actuator
• For gates weighing up to 600kg
• Equipped with a 24V motor and a built-in HAMAL control unit
• Control unit programming using buttons and potentiometers
• The control unit has an integrated 2-channel radio receiver with a dynamic code
• Amperometric obstacle detection function, soft start, release at the end of the cycle
• Mechanical limit switches

Technical data:

• Gate weight: 600 kg
• Power supply: 230V +/- 10% 50Hz
• Motor: 24V
• Power consumption: 70W
• Gear module 4mm: 14 teeth
• Torque: 30 Nm
• Travel speed: 12 m/min.
• Control unit: HAMAL
• Obstacle detection: YES
• Obstacle detection type: electronic
• Limit switches: mechanical
• Impact response: D-Track
• Operating temperature: from -20 C to +55 C
• Protection class: IP44
• Gear lubrication: grease
• Mode of use: 80 cycles/day
• Actuator weight: 8.7 kg
• Radio receiver/channels/memory: built-in/2-channel/63 remotes
• Setting operating parameters: trimmers + microswitches